667
DP-C405/C305/C265
FEB 2008Ver. 1.1
3. Set the Key/Dept. Code by following the steps below.
1) Press the “Function” key on the Control Panel, and then select “General Settings” on the Touch
Panel display.
d. Scroll the menu with the “” button on the Touch Panel display, and then select “09 Key Operator
Mode”.
2) Input the 8-Digit Password, and then select the “OK” button to enter the Key Operator Mode.
3) Scroll the menu with the “” button on the Touch Panel display, and then select “21 Dept.
Counter Mode”.
4) Select “Identification Code” on the Touch Panel display, and then one of the Dept Counter Codes
(“001:” up to “1000:”).
5) Select the “Input” on the Touch Panel display; enter a new Departmental Counter Code (up to 8-
digit), and then select the “OK” button.
6) Enter a desired name in “Departmental Counter Data/Enter Text” field on the Touch Panel
display, and then select the “OK” button.
7) Select the “OK” button on the Touch Panel display, and then select the “Close” button.
8) Press the “Stop” key on the Control Panel to return to the standby mode.
To Next Page
Loading...
