Panasonic DP-C305 - Installing the Printer Controller Module (DA-MC400)

658
DP-C405/C305/C265
FEB 2008Ver. 1.1
9.2. Installing the Printer Controller Module (DA-MC400)
9.2.1. Contents
Note:
Refer to the Parts Manual for Part Number(s), Packing, and Accessories detail.
9.2.2. Installation
CAUTION!
Turn the Power Switch on the Left Side, and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
No. Qty. Description Remarks
1 1 Hardware Key PS KEY
2 1 Software CD Includes Operating Instructions
3 1 Adobe PostScript 3 Label
4 1 Installation Instructions This document
(1) Loosen 11 Screws.
(2) Remove the Rear Cover 1.
Caution:
If the LED on the SC PC Board is lit (ON), the
Power to the machine is still ON.
Please read the entire section “9.2.2. Installation”
once again.
1
2
3
4