172
DP-C405/C305/C265
FEB 2008Ver. 1.1
2.2.16. Drive Unit
(1) Open the Front Cover
(2) Remove the Toner Waste Container.
(3) Pull all the Drum Units out approximately 20 mm
(0.79 in).
(4) Remove the 2 Screws (X5).
(5) Remove the SC Support Bracket (3903).
(6) Release the Harnesses from 11 Clamps, and
the Drive Unit.
(7) Remove the Main Drive Unit (5811).
(8) Remove 12 Screws (Y19).