737
DP-C405/C305/C265
FEB 2008Ver. 1.1
9.17. Replacing the OPC Drum
Refer to the Operating Instructions (For Basic Operations, Problem Solving Section).
9.18. Replacing the Toner Waste Container
Refer to the Operating Instructions (For Basic Operations, Problem Solving Section).
Note:
The U14 “Replace The Toner Waste Container” User Code indicator operates as follows:
A. Blinking Maintenance and Toner Waste Container Indicators
The machine will complete the current job, and stop operating. To continue using the machine
temporarily while waiting for a replacement container, press any key (approximately 300 additional
copies can be made).
B. Steady Maintenance and Toner Waste Container Indicators
Upon reaching approximately 300 copies, the machine stops and will not allow further operation
until the Toner Waste Container is replaced.
To Next Page
Loading...
