Panasonic DP-C305 - Continuous Polling (Station Mode)

570
DP-C405/C305/C265
FEB 2008Ver. 1.1
Note 1: Continuous Polling (Station Mode)
This feature allows you to store, or add documents into a polled file in memory.
To enable the Continuous Polling feature set Function Parameter No. 003 to "2:Station".
The last Program Key will be assigned with the “Store 4 Poll” Key name automatically,
and cannot be changed.
To prepare the document(s) to be polled, simply place the document(s) on the ADF or Platen,
and then press the Program Key to store, or add the document(s) into a polled file.
(Note: If a regular polled file is stored in memory, the Program Key for Continuous Polling will
not be accepted.)
Note 2: Function Parameter No. 070 (Line Error)-Transmit condition of RTP/PIP, or RTN/PIN
Note 3: Function Parameter No. 071 (Total Error)-Transmit condition of RTP/PIP, or RTN/PIN
Note 4: The default setting of parameters depends on the country’s specifications, or regulations. Print the
Function Parameter List to confirm the default settings.
141 T/P Density (It) -32
~
+31
Adjustment of Text / Photo density.
142 Photo Density (It) -32
~
+31
Adjustment of Photo density.
143~
145
Not Used
146 T / P Density (dk) -32
~
+31
Adjustment of Text / Photo density for dark.
147 Photo Density
(dk)
-32
~
+31
Adjustment of Photo density for dark.
148~
174
Not Used
175 Fax/Email Default Adr.Book
ModeSet
176~
199
Not Used
Signal
Setting
128 256 512 1024 2048 Off
MCF 0-31 0-63 0-127 0-255 0-511 Always
RTP 32-63 64-127 128-255 256-511 512-1023 -
RTN 64-127 128-255 256-511 512-1023 1024-2047 -
Signal
Setting
5% 10% 15% 20%
MCF 0-2 0-4 0-7 0-9
RTP 3-4 5-9 8-14 10-19
RTN 5- 10- 15- 20-
Function Parameter Table
No. Parameter Selections Function