Panasonic DP-C305 - Cleaning the ADU 3 Rd Roller; Cleaning the Registration Roller

122
DP-C405/C305/C265
FEB 2008Ver. 1.1
(39) Disconnect the Harness on the ROHP PC
Board.
(40) Remove 2 Screws (F10).
(41) Remove the ROHP PC Board (2110).
(42) Disconnect 2 Harnesses.
(43) Remove the Harness from 2 Clamps.
(44) Remove 2 Screws (F10).
(45) Remove the RI Sensor Plate (2131).
For DP-C265, DP-C354 / C322 Series
Follow steps (46) - (48)
(46) Disconnect the Harness.
(47) Remove 2 Screws (F10).
(48) Remove the ROHP PC Board (2110).
<Cleaning the ADU 3rd Roller>
(1) Open the Sheet Bypass Tray.
(2) Open the Lower ADU Door.
(3) Clean the ADU 3rd Roller with a soft cloth,
saturated with water.
<Cleaning the Registration Roller>
(1) Open the Sheet Bypass Tray.
(2) Open the Lower Right Side Cover.
(3) Clean the Registration Roller with a soft cloth,
saturated with water.