Panasonic DP-C305 - Removing Rollers

871
DP-C405/C305/C265
FEB 2008Ver. 1.1
(13) Disconnect all the Harnesses on the CONT PC
Board.
(14) Remove 1 Screw (14133).
(15) Remove the CONT PC Board (14528).
<Removing Rollers>
(16) Lift up the Guide Base (14301) Assembly.
(17) Clean the Exit Roller (14437).
(18) Disconnect the Harness.
(19) Remove 1 Screw (14021) and 1 Screw (14131).
(20) Remove the Guide Base (14332) Assembly.
(21) Release the Tension Spring (14524) and Latch,
and then remove the Lock Arm (14525).