787
DP-C405/C305/C265
FEB 2008Ver. 1.1
12.1.2.5. Saddle Unit
12.1.2.5.1. Basic Operations
1. Outline
The Machine stitches a stack of sheets (middle 2-point), then folds the stack in two in the Finisher.
These operations are controlled by the Finisher Controller PCB.
The Finisher Controller PCB is controlled by the commands from the Host Machine.
12.1.2.5.2. Feed / Drive System
1. Outline
This machine stitches the paper stack coming from the Finisher, folds it, and delivers it to the Bind Tray
in the Saddle Unit in response to the commands from the Host Machine.
That is, the machine performance the following operations :
1) Paper Feed-in
2) Stitching
3) Stack Feed
4) Folding / Delivery
Fig. 2-036
1) Paper feed-in
2) Stitching
3) Stack feed
4) Folding/delivery
To Next Page
Loading...
