Panasonic DP-C305 - SD Memory Card on the SC PCB (Not the Front Slot)

38
DP-C405/C305/C265
FEB 2008Ver. 1.1
1.2.5. SD Memory Card on the SC PCB (Not the Front Slot)
SD Memory Card Formatting Structure and Partitioning by Function
Note:
1. This function is available only when an SD Memory Card is installed on the PCB (Not in the Front Slot),
and is used for G3 Fax / Internet Fax, etc.
2. The SD Memory Card is formatted automatically for the Fax/Internet Fax memory when the Power
Switch is turned ON. This format is not compatible with the PC's memory.
3. Max. Number of Pages is based on ITU-T Image No.1 (A4, Standard Resolution).
4. Max. XMT file management number (G3 Fax / Internet Fax) = Max. 255 pages/file, Max. 50 Files.
5. Max. RCV file management number (G3 Fax / Internet Fax) = Max. 999 pages.
6. Max. page number may differ depending on the manufacturer of the SD Memory Card.
(Recommended Card Size is 128 MB or Higher).
7. The Color Image is stored into the Hard Disk Drive Unit.
8. When the SD Memory Card is formatted by the machine, it can not be used for the PC's memory. If the
Card needs to be used on the PC again, it must be reformatted by using a PC tool which is available
from the Web site below.
http://panasonic.jp/support/audio/sd/download/sd_formatter_e.html
SD Memory Card Formatting Structure
SD Memory Size 64 MB
128 MB - 4 GB for DP-C405 Series
128 MB - 1 GB for DP-C354/C322 Series
Max. Number of Pages 2,300 6,900
Memory Partition Usage by Function
Function 64 MB
128 MB - 4 GB for DP-C405 Series
128 MB - 1 GB for DP-C354/C322 Series
G3 Fax / Internet Fax Yes
Counter / Parameter Auto Back up Yes for DP-C405 Series
Counter Auto Back up Yes for DP-C354/C322 Series