549
DP-C405/C305/C265
FEB 2008Ver. 1.1
5.1.7. F7 Mode: Electronic Counter
Set the machine to Service Mode, and press the “7” key on the Control Panel.
↓
Press the “Start” key to enter the F7 Service Mode on the Control Panel.
↓
Select the desired code number on the Touch Panel display.
↓
If you wish to select another function, select the Tab key on the Touch Panel display, or scroll the menu
with the “”, “” buttons.
↓
Select the desired function on the Touch Panel display.
↓
Select the “Input” button code number on the Touch Panel display, and then select the “OK” button.
If you wish to input minus value, press the “Reset” key on the Control Panel.
When the “Cancel” button is selected, the selected code input will not be accepted.
↓
Select the “Close” button twice on the Touch Panel display.
↓
Press the “Function”, and the “C (Clear)” keys simultaneously on the Control Panel to exit the Service
Mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s). (Turn the Power Switch on
the Left Side of the machine to the OFF then back to the ON position.)
F7 Mode
No. Item Function Remarks
00 List Print
01 Application Password
(DP-C405/C354 Series Only)
Password for Firmware Version update, Print job
queue functions, and various PC application
operations.
Key Operator ID Code
(DP-C322 Series Only)
Key Operator’s identification code for access to
the counter mode.
02 Maintenance
Count (1/2)
00 Total Count B/W Copies / Prints Total Counter.
01 Total Count 1C
02 Total Count 2C
03 Total Count 4C
04 Total Print Count
05 Toner Page Count Y Copies / Prints Toner Page Counter.
06 Toner Page Count M
07 Toner Page Count C
08 Toner Page Count BK
09 Not Used
10 PM Count Preventive Maintenance Counter.
11 Scanner PM Count Scanner Reading PM Counter.
12 ADF Count Total Originals fed through the ADF Counter.
13 ADF PM Count ADF PM counter
14 Not Used
To Next Page
Loading...
