SD Card Firmware Writing Tool
Page 6
4. Creating a Master Firmware SD Memory Card
1
Insert SD Memory Card into the SD Memory Card Reader/Writer of your PC.
Note: Please check the SD Memory Card Reader/Writer before this procedure begins to ensure it
works properly. The SD Card must contain at least 100 megabytes of free space, otherwise
the operation will fail.
2
From the Windows Desktop, double-click on
the SD Memory Card Firmware Writing
Tool shortcut icon to start the tool.
Note: If a shortcut was not created to the
Windows Desktop at the time of installation,
click the Start button on the Taskbar, point to
(All) Programs ► Panasonic ► Panasonic
Firmware Update, then select SD Memory
Card Firmware Writing Tool.
Click [Browse] of Source Firmware parent file
folder.
3
Select the Parent File Folder (For example
DP-C322_C262_PU_20060615) and Click
[OK].
4
Select the drive letter that the SD Card Reader
Writer is mounted.
For example: H: (Removable Disk)
To Next Page
Loading...
