SD Card Firmware Writing Tool
Page 7
5
Confirm the Source Firmware parent file folder
and Output Destination (SD Memory Card),
and click [Create].
6
Start copying firmware code files…
7
The completion message is displayed when
copying is completed.
Click [OK].
8
A Firmware Deletion confirmation screen will
appear.
Click [Yes] to delete the firmware code files
that you used for the update, or
click [No] to keep the firmware code files in
your PC for future use.
9
Confirm the message in the text box and click
[OK] to close the tool.
To Next Page
Loading...
