Panasonic DP-C305 - Color Image Quality Adjustment

418
DP-C405/C305/C265
FEB 2008Ver. 1.1
4.3.2.2. Color Image Quality Adjustment
Mono
Copy
Density Adj.
Dark
Text F6-225 Density Adjustment of Dark area
* Not used for reducing the density compensation
* Adjust according to customer's needs
Default: 0 : -32 => 31 + (Lighter to Darker)
Text mode: Useful for Newspapers, Tracing Paper, etc
T/P mode: Useful for Maps, 1-Color, 2-Color
Photo mode: Useful for Photos
T/P F6-226
Photo F6-227
-32 - 31
0 (default)
Contrast
Adjustment
Text F6-205 Contrast Adjustment (For 1-Color, 2-Color)
* Not used for reducing the density compensation
* Adjust according to customer's needs
Default: 0 : -32 => 31 + (Higher to Lower)
Text mode: Useful for Newspapers, Tracing Paper, etc
T/P mode: Useful for Maps, 1-Color, 2-Color
Photo mode: Useful for Photos
T/P F6-206
Photo F6-207
-32 - 31
0 (default)
Sharpness
(BK/Color)
Text F6-230 Image sharpness adjustment (Color and Monochrome)
* Not used for reducing the density compensation
* Adjust according to customer's needs
Default: 0 : -3 => 3 + (Higher to Lower)
Text mode: Useful for Newspapers, Tracing Paper, etc
T/P mode: Useful for Maps, 1-Color, 2-Color
Photo mode: Useful for Photos
T/P F6-231
Photo F6-232
-3 - 3
0 (default)
Color Judge
Level
Slice level F6-235 Detection level for color document(s) in Auto Mode
* Copier Function Setting No: 31 Color Judge Level setting
is also available: 1 (Monochrome)=>4 (Default)=>7 (Color)
(Combination with slice level and area)
(1) Slice Level
* Use for the light density color original
Default: 6 : 0 => 15 (Color to Monochrome)
(2) Area Level
* Use for the small color area original
Note:
Dust may be detected under low area level setting
Default: 6 : 0 => 15 (Color to Monochrome)
Area level F6-236
0 - 15
6 (default)
Mode Adjustment F-Code Function
Color
Copy
Density Adj.
Highlight
Text F6-210 Density Adjustment of Highlighted area for Color Image
* Perform after completing the printer, and scanner
adjustment
* Not used for reducing the density compensation
* Adjust according to customer's needs
Default: 0 : -32 => 31 + (Lighter to Darker)
Text mode: Useful for Newspapers, Tracing Paper, etc
T/P mode: Useful for Maps, 1-Color, 2-Color
Photo mode: Useful for Photos
T/P F6-211
Photo F6-212
-32 - 31
0 (default)
Density Adj.
Dark
Text F6-215 Density Adjustment of Dark Area
* Not used for reducing the density compensation
* Adjust according to customer's needs
Default: 0 : -32 => 31 + (Lighter to Darker)
Text mode: Useful for Newspapers, Tracing Paper, etc
T/P mode: Useful for Maps, 1-Color, 2-Color
Photo mode: Useful for Photos
T/P F6-216
Photo F6-217
-32 - 31
0 (default)
Mode Adjustment F-Code Function