Panasonic DP-C305 - Jam Sensor Location of I-ADF

450
DP-C405/C305/C265
FEB 2008Ver. 1.1
• Jam Sensor Location of i-ADF
Jam Error Codes (J Code) Table
Code Contents Section
J00 The Registration Sensor 1 (2110 : ROHP PCB) does not detect paper within a
predetermined time after the paper starts feeding. (Sheet Bypass)
Sheet
Bypass
J01 The 1st Paper Path Sensor (1919) does not detect paper within a predetermined time
after the Paper Feed Roller starts rotating. (Paper Tray 1)
Paper
Tray
J02 The 2nd Paper Path Sensor (1919) does not detect paper within a predetermined time
after the Paper Feed Roller starts rotating. (Paper Tray 2)
J03 The 3rd Paper Path Sensor (1919) does not detect paper within a predetermined time
after the Paper Feed Roller starts rotating. (Paper Tray 3)
J04 The 4th Paper Path Sensor (1919) does not detect paper within a predetermined time
after the Paper Feed Roller starts rotating. (Paper Tray 4)
J06 1. The Intermediate Roller Jam Sensor (1819-01) does not detect paper within a
predetermined time after the Paper Feed Roller starts rotating. (Sheet Bypass)
(DP-C405/C305)
2. The Intermediate Roller Jam Sensor (1819-01) does not detect paper within a
predetermined time after the Paper Feed Roller starts rotating. (Paper Tray 1)
(DP-C405/C305)
3. The Intermediate Roller Jam Sensor (1819-01) does not detect paper within a
predetermined time after the Feed clutch is on as double feed timing.
(Paper Tray 1) (DP-C405/C305)
4. The Intermediate Roller Jam Sensor (1819-01) does not detect paper within a
predetermined time after the Paper Feed Roller starts rotating. (Paper Tray 1)
(DP-C405/C305)
Paper
Feed
The Intermediate Roller Jam Sensor (1819-01) does not detect paper within a
predetermined time after the Paper Feed Roller starts rotating. (Paper Tray 2)
(DP-C354/C322 Series)
J07 1. The Option Intermediate Roller Jam Sensor (1819-03) does not detect paper within
a predetermined time after the Paper Feed Roller starts rotating.
(Paper Tray 3-4)
2. The Intermediate Roller Jam Sensor (1819-01) does not detect paper within a
predetermined time after Feed clutch is on as double feed timing.
(Paper Tray 2) (DP-C405 Series)
3. The Intermediate Roller Jam Sensor (1819-01)does not detect paper within a
predetermined time after the Paper Feed Roller starts rotating.
(Paper Tray 2) (DP-C405 Series)
ADF Registration Sensor 1 (401-06)
ADF Exit Sensor (401-10)
ADF Selection Sensor (401-07)
ADF Registration Sensor 2 (401-08)
ADF Registration Sensor 3 (401-09)