Panasonic DP-C305 - Preparing the Main Unit for the Firmware Upgrade; Confirmation

662
DP-C405/C305/C265
FEB 2008Ver. 1.1
Example:
From:
Destination Shortcut Batch File: D:(CD-ROM Drive) \ xFirmware \ USA.bat
Firmware Code File: C405_C305_C265_xx_xxxxxxxx_xx.exe
To:
Firmware Data Folder: C:\ Panasonic \ Panasonic-FUP \ Data
3. Preparing the Main Unit for the Firmware Upgrade
Before starting, print the F5/F6 Parameters List (Copy Service Mode F9-03-00).
Important: DO NOT connect the USB Cable yet.
Enter into Service Mode F9-07-01 (Update From USB) to enable the unit to accept the programming
code from the USB Port.
Now connect the USB Cable between the Unit, and PC.
4. Upgrading the Main Unit's Firmware Code
Start the Local Firmware Update Tool, and select the following Parent Firmware File Folder in the
C:\Panasonic\Panasonic-FUP\Data folder. The Firmware Type window appears, and proper
Firmware Files are selected automatically by selecting the Firmware Type.
Then follow the display instructions to upgrade the Main Unit's Firmware Codes.
5. Confirmation
After the update is completed, the machine reboots itself, and returns to standby.
Confirm the F5 & F6 parameters according to the printed lists in Step 3. above if the settings are
different.
Note:
1. While updating the firmware code, the display may become garbled, however, it will return to
normal upon completion of the firmware update.
2. The suffix “_xx” for the Folder Name, or File Name may not exist depending on the destination
location.
3. Updating the Firmware using the Master Firmware SD Memory Card
If the Master SD Memory Card includes all necessary firmware as a package.
(Only one SD Memory Card is required (minimum 128 MB size) to update the SC PCB with the Standard, or
with all Optional firmware configurations.)
Parent Firmware File Folder Sub Firmware File Folder
\ DP-C405_C305_C265_xx_xxxxxxxx \ Sc_Std \ CMFP25SCAxVxxxxx_xx
\ Sc_Ps \ CMFP25SCDxVxxxxx_xx
\ Fcb \ CMFP1FCBAxVxxxxx_xx
\ Ec \ CMFP4_ECAAVxxxxx (DP-C405_C305)
\ Ec \ CMFP5_ECAAVxxxxx (DP-C265)
\ Scn \ CMFP2SCNAAVxxxxx
When you select the Parent Folder, the following
Firmware Type window appears. Proper Sub File Folders
are selected automatically by selecting the Firmware
Type.
The transferring order is set up automatically.