Panasonic DP-C305 - Removing the Staple;Fold Drive Unit

821
DP-C405/C305/C265
FEB 2008Ver. 1.1
Fig. 3-043
2-7. Removing the Staple/Fold Drive Unit
(1) Open the Front Door [1], and slide out the
Stapler Unit [2] slightly to the front.
Fig. 3-044
(2) Remove 1 screw [3], and detach the Interface
Retainer [4].
(3) Free the 6 Harness Retainers [5], and
disconnect the Connector [6].
(4) Free the Harness [7] from the Harness
Retainer [5].
(5) Free the Harness [7] from the Edge Saddle [8];
then, disconnect the 2 Connectors [9].
Fig. 3-045
(6) Release the Harness Retainer [10], and
disconnect the Connector [11].
(7) Free the Harness [12] from the Harness
Retainer [10].
(8) Free the Harness [12] for the Edge Saddle [13];
and disconnect the 2 Connectors [14].
[1]
[2]
[9]
[8]
[7]
[5]
[5]
[5]
[7]
[7]
[7]
[4]
[3]
[5]
[6]
[11]
[12]
[10]
[13]
[14]