Panasonic DP-C305 - Page 168

168
DP-C405/C305/C265
FEB 2008Ver. 1.1
(45) Disconnect the Harness on the Motor PC Board
Assembly.
(46) Remove 3 Screws (X5).
(47) Remove the Motor Assembly.
Note:
These procedures are for Motor Assemblies No. 1
(5901), No. 3 (5903), No. 4 (5905), and No. 6
(6126) shown in the illustration of step (44).
(48) Disconnect the Harness on the Motor PC Board
Assembly.
(49) Remove 4 Screws (X5).
(50) Remove the Motor Assembly.
Note:
These procedures are for Motor Assemblies No. 2
(5902), and No. 5 (5904) shown in the illustration
of step (44).
Caution:
When removing the Motor Assembly No. 3, set the
Drum Units for Yellow, Magenta and Cyan color,
and turn the levers clockwise.
Caution:
When removing motor assemblies, don’t touch nor
rotate the drive gears shown in the illustration, or
the printing quality will be affected.