Panasonic DP-C305 - Page 191

191
FEB 2008Ver. 1.1
DP-C405/C305/C265
Note:
When replacing the IT Unit, the STR Unit and Cleaning Unit are also replaced at the same time, and then
perform F8-29, F8-32, and F8-30 Service Mode operations.
24 Cleaning Unit 3418 120K
F7-02-52
STR Life
Count
120K:
Alarm
(Machine
Continues
Operating)
Perform “F8-32 STR Counter
Reset”.
(F7-02-52 STR Life Count is also
initialized by this operation)
Automatic Duplex Unit (Lower)
25
Second Transfer
Roller (STR) Unit
2535 120K
F7-02-52
STR Life
Count
-
IT Unit, STR Unit,
and Cleaning Unit
-- --
Perform “F8-29 Belt Counter
Reset”.
(F7-02-51 Belt Life Count Down is
also initialized by this operation)
Perform “F8-32 STR Counter
Reset”.
(F7-02-52 STR Life Count is also
initialized by this operation)
Perform “F8-30 Color Reg ”.
Developer Unit
34 Y (Yellow)
5443.
480K
F7-02-
40~43
Deve. Unit
Count
480K:
Alarm
(Machine
Continues
Operating)
Perform “F8-09 Toner Density Adj”.
(F7-02-40, 41, 42, 43 Deve. Unit
Count, and F7-02-45, 46, 47, 48
Developer Count are also
initialized by this operation)
35 M (Magenta) 480K
36 C (Cyan) 480K
37 BK (Black) 480K
Developer
-Y (Yellow)
5445
-
F7-02-
45~48
Developer
Count
-
<Only in case of Problem>
Perform “F8-11 Deve. Counter
Reset”.
(F7-02-45, 46, 47, 48 Developer
Count are also initialized by this
operation)
- M (Magenta) -
-C (Cyan) -
- BK (Black) -
Paper Feed Module
41
Paper Feed Roller
(1st/2nd/3rd/4th)
1922 240K
F7-03-
01~04
1st/2nd/
3rd/4th
Paper Tray
Count
PM
Display
only
(Machine
Continues
Operating)
Enter the Copy Service Mode
F5-70 (PM Cycle), and change to
the desired value.
42
DFP Roller
(1st/2nd/3rd/4th)
1911 240K
43
Pickup Roller
(1st/2nd/3rd/4th)
1926 240K
Sheet Bypass
45 Paper Feed Roller 3003 240K
F7-03-00
Bypass
Tray Count
46 Pickup Roller F 3005 240K
47 DFP Roller 3111 240K
48 Pickup Roller R 3012 240K
No. Mechanical Parts
Ref.
No.
Replace
Ref.
Counter
Replace
Alarm
Reset
Counter
Cycle
(Sheets)