230
FEB 2008Ver. 1.1
DP-C405/C305/C265
(4) Fold one Cotton Sheet to 1/4 as illustrated.
(Save the other Cotton Sheet as a spare)
(5) Lightly pat the Cotton sheet on the powder.
(6) Generously apply the Setting Powder onto the
surface of the IT Belt, by lightly and uniformly
patting the Belt from left to right.
Note:
Insufficient lubrication of IT Belt may reduce it’s, or
a related component's life, or aff
ect its
performance.
Note:
* Refer to the illustration on the left for the area of
application.
* Extra setting powder applied to the upper most
area as illustrated on the Left is recommended
for best results.
To Next Page
Loading...
