242
FEB 2008Ver. 1.1
DP-C405/C305/C265
(69) Unlock 2 Levers by turning in the upward
direction, and sliding to the right.
(70) Remove the Front Cover.
(71) Remove 4 Screws (S6).
(72) Remove the Mechanical Counter Cover.
(73) Open the Upper Right Cover, and remove
1 Screw.
(74) Remove the Front Right Cover by releasing the
Latch.
DP-C405 Series
(75) Remove the Upper Snap Ring.
(76) Remove the Upper Ball Bearing.
(77) Remove the Lower Snap Ring.
(78) Remove the Lower Ball Bearing.
Caution:
When reinstalling, make sure that the Ball Bearing
(Not Metal Bearing) is installed properly as same
position (Rear).
DP-C354/C322 Series
(79) Remove the Upper Snap Ring.
(80) Remove the Upper Bearing.
(81) Remove the Lower Snap Ring.
(82) Remove the Lower Bearing.
To Next Page
Loading...
