247
FEB 2008Ver. 1.1
DP-C405/C305/C265
(9) Remove 6 Screws (Y31).
(10) Release the Harness from 3 Harness Clamps.
(11) Remove the Center Bracket.
(12) Remove 4 Screws (X5).
(13) Remove the Left EC PCB Bracket (3909).
(14) Remove the Harnesses from the EC PC Board
Assembly.
(15) Remove 7 Screws (X5).
(16) Remove the EC PCB Assembly by lifting, and
pulling as shown by the arrow.
To Next Page
Loading...
