258
FEB 2008Ver. 1.1
DP-C405/C305/C265
(19) Unlock the STR Guide.
Caution:
When unlocking, exercise care not to pinch your
fingers with the STR Guide.
(20) Install the STR Unit.
Note:
During the installation ensure that the hook is
properly attached.
(21) Reinstall the Guide Bracket.
Note:
When reinstalling, make sure that the convex is in
the hole as illustrated.
(22) Reinstall the Support Arm Assembly.
(23) Reinstall the Snap Ring.
(24) Close the Lower Right Side Cover.
(25) Close the Sheet Bypass Tray.
To Next Page
Loading...
