Panasonic DP-C305 - Page 502

502
DP-C405/C305/C265
FEB 2008Ver. 1.1
304 IH Core Sensor 2
(DP-C322 Series Only)
Sensor is not activated
A3 Home Position. (Lo)
0
IH Core Sensor 1
(DP-C322 Series Only)
Sensor is not activated
A3 Home Position. (Lo)
0
Fuser Pressure Release
Sensor 2
Sensor is not activated
Release Position. (Lo)
0
Fuser Pressure Release
Sensor 1
Sensor is not activated
Release Position. (Lo)
0
Belt Motor Ready
(DP-C405 Series Only)
Ready state not detected. 1
Fuser Unit Enter Sensor Sensor is activated. (Hi) 1
IT Belt Home Position Sensor. IT Belt Home Position is
detected.
1
305 Polygon Motor Ready 1
Development Motor 2 Ready Ready state not detected. 1
Development Motor 1 Ready Ready state not detected. 1
Drum Motor 2 Ready Ready state not detected. 1
Drum Motor 1 Ready Ready state not detected. 1
Paper Feed Motor Ready Ready state not detected. 1
Paper Full Sensor Ready state not detected. 0
306 Toner Cartridge Fan Ready
(Lock)
(DP-C405 Series Only)
Ready state not detected. 1
IH Driver Fan Ready
(DP-C405 Series Only)
Ready state not detected. 1
Toner Cartridge Motor Lock
Detection Sensor BK
(DP-C405 Series Only)
Locked position detected. 0
Toner Cartridge Motor Lock
Detection Sensor C
(DP-C405 Series Only)
Locked position detected. 0
Toner Cartridge Motor Lock
Detection Sensor M
(DP-C405 Series Only)
Locked position detected. 0
Toner Cartridge Motor Lock
Detection Sensor Y
(DP-C405 Series Only)
Locked position detected. 0
Fuser Roller Rotating Encoder
2
(DP-C405 Series Only)
Rotation not detected.
(Low = not detected).
0
Fuser Roller Rotating Encoder
1
(DP-C405 Series Only)
Rotation not detected.
(Low = not detected).
0
F4 Mode (Input Check)
No. Function Condition
Message Display
Remarks
76543210