Panasonic DP-C305 - Page 508

508
DP-C405/C305/C265
FEB 2008Ver. 1.1
528 ADU Clutch 2 Clutch stops automatically after energizing for
1 min.
529 Exit 2 Way Roller Rotation in
Forward Direction Clutch
Clutch stops automatically after energizing for
1 min.
530 Exit 2 Way Roller Rotation in
Reverse Direction Clutch
Clutch stops automatically after energizing for
1 min.
531 Paper Feed Intermediate Roller
Clutch (Paper Tray Option)
Clutch stops automatically after energizing for
1 min.
532 Transportation Unit Transport
Clutch
Clutch stops automatically after energizing for
1 min.
533 Speed Increasing Clutch
(DP-C405/C305 Only)
Clutch stops automatically after energizing for
1 min.
534 OP Speed Increasing Clutch
(DP-C405/C305 Only)
Clutch stops automatically after energizing for
1 min.
535-
559
Not Used
560 Mechanical Counter 1 Stops automatically after 1 count.
561 Mechanical Counter 2 Stops automatically after 1 count.
562-
599
Not Used
F4 Mode (Input Check)
No. Function Condition
Message Display
Remarks
76543210
600 Entrance Paper Path Sensor Paper is detected. 1 1-Bin Finisher
(DA-FS402/FS350/
FS320) Only.
Exit Paper Path Sensor Paper is detected. 1
Alignment Home Position
Sensor
Home position is detected. 1
Paper Detection Sensor Paper is detected. 1
Paper Holding Sensor Paper is detected. 1
Upper Limit Detection Sensor Upper Limit is detected. 1
Exit Tray Full Sensor Paper Exit Tray is full. 1
Stapler Home Position Sensor Home position is detected. 1
601 Stapler Cartridge Sensor No Stapler Cartridge is
detected.
1
Staple Empty Limit Sensor Stapler nearly empty is
detected.
1
Stapler Unit Lock Sensor Stapler Unit is detected. 1
Stapler Cover Switch Cover is open. 0
Top Cover Sensor Cover is open. 0
Joint Detect Sensor Finisher Unit is detected. 0
602-
649
Not Used
F4 Mode (Output Check)
No. Item Function Remark