Panasonic DP-C305 - Page 510

510
DP-C405/C305/C265
FEB 2008Ver. 1.1
703 Stack Tray Paper Sensor Paper is detected. 1 1-Bin Saddle-Stitch
Finisher
(DA-FS405/FS356/
FS325) Only.
Paper Surface Sensor Paper surface is detected. 1
Stack Tray Middle Sensor Middle Position is
detected.
1
Stack Tray Upper Limit Sensor Upper limit is detected. 1
Stack Tray Lower Limit Sensor Lower limit is detected. 1
704 Punch Unit Connect Signal Punch Unit is connected. 1
705-
749
Not Used
F4 Mode (Output Check)
No. Item Function Remark
750 Transportation Motor Paper Transport Motor rotates. 1-Bin Saddle-Stitch
Finisher
(DA-FS405/FS356/
FS325) Only.
751 Saddle Roller Contacting Saddle Roller making contact.
752 Stack Delivery Motor rotates in
the forward direction
Stack Delivery Motor rotates.
753 Stack Delivery Motor rotates in
the reverse direction
Stack Delivery Motor rotates.
754 Paddle Rotates Paddle rotates.
755 Stack Roller Contacting Stack Roller making contact.
756 Slide Motor Stapler Unit horizontal shift.
757 Alignment Operation Alignment Plate Shuttle home position
between A4 position.
758 Tray Motor Tray Shuttle paper surface between full
position.
759 Staple Operation Staple operation.
760 Folding Operation Folding operation.
761 Transport Motor (Folding) Transport to folding position.
762 Folding Clutch Clutch turns ON/OFF for 1 sec. cycle.
763 Punch Operation Punch operation.
764 Punch Horizontal Registration
Operation
Punch horizontal registration operation.
765-
799
Not Used
F4 Mode (Input Check)
No. Function Condition
Message Display
Remarks
76543210