Panasonic DP-C305 - Page 513

513
DP-C405/C305/C265
FEB 2008Ver. 1.1
15 Paper Size Tray 2
[When “OK” is
selected, a prompt
comes up asking for
the desired Media
Type - Trays 1, 3, & 4
work the same way]
None
A3
B4
A4
A4-R
B5
B5-R
A5-R
8 x 13
8.5 x 13
11 x 17
LEGAL
8.5 x 11
8.5 x 11 R
5.5 x 8.5
8K (For China)
16K (For China)
11 x 17 (for USA /
Canada)
A3 (for Europe)
Set the paper size and the media
type for Tray 2.
Select 'None' to disable the Tray.
Media Type Plain
Glossy
Recycled
Thick (DP-C405
Series Only)
Plain
16 Paper Size Tray 3 Same as F5-15 None Set the paper size and the media
type for Tray 3.
Enable the Optional Tray.
Media Type Plain
17 Paper Size Tray 4 Same as F5-15 None Set the paper size and the media
type for Tray 4.
Enable the Optional Tray.
Media Type Plain
18-19 Not Used
20 ADF No
Auto
Auto Select whether to automatically
detect or disable the ADF Unit.
21 Finisher No
Auto
Auto Select whether to automatically
detect or disable the Finisher Unit.
22 System Console No
Auto
Auto Select whether to automatically
detect or disable the System
Console.
23 Paper Transport Unit No
Auto
Auto Select whether to automatically
detect or disable the Paper
Transport Unit.
24-25 Not Used
26 2-Sided Unit No
Auto
Auto Select whether to automatically
detect or disable the Duplex Unit.
27-31 Not Used
32 Job Build and SADF
Mode
No
Yes
Yes Set whether the Job Build and
SADF mode are enabled.
33 Not Used
34 Multi Size Feed
Default
Off
On
Off Set whether the Multi Size Feed is
enabled.
35-37 Not Used
F5 Mode
No. Item Selection Default Setting Remarks