618
DP-C405/C305/C265
FEB 2008Ver. 1.1
(9) Open the Feed Cover.
(10) Remove 2 Blue Screws.
(11) Pull the Red Wire Strap (with the Caution Tag)
to remove 2 Shipping Brackets.
Caution:
If the Shipping Materials (Blue Screws, and
Shipping Brackets) are not removed as instructed,
the machine may get damaged when the Power
Switches are turned ON.
(12) Close the Feed Cover.
(13) Remove the Tape.
(14) Remove 1 Blue Screw to unlock the Scanner.
Caution:
If the Shipping Material (Blue Screw) is not
removed as instructed, the machine may get
damaged when the Power Switches are turned
ON.
Note:
Store the Shipping Materials (Blue Screws, and
Shipping Brackets) in a safe place for future use.
(15) Remove the Protective Tape from the Battery.
To Next Page
Loading...
