665
DP-C405/C305/C265
FEB 2008Ver. 1.1
(3) Install 2 Image Memory Boards into two
connectors (CN5, and CN6) on the SC PC
Board.
Note:
Make sure to align the notch first, and insert the
Image Memory Board at a 20 - 30° angle into the
memory socket, and then lock it down.
(4) Proceed with the installation of other options.
If finished, reinstall all Harnesses and Covers.
(5) Plug the AC Power Cord, and turn the Main
Power Switch on the Back and the Power Switch
on the Left Side of the machine to the ON
position.
(6) Reconnect the Telephone Line / LAN Cable if
disconnected.
To Next Page
Loading...
