706
DP-C405/C305/C265
FEB 2008Ver. 1.1
(4) Release the pre-installed Harness(es) in the
machine from the Harness Clamp(s).
(5) Connect the Harness(es) to the Mechanical
Counter(s).
(6) Install the Mechanical Counter(s).
(7) Secure the Mechanical Counter(s) with 1
Screw each.
Note:
Upper : Counter 1
Lower : Counter 2
(8) Remove the Protective Tab(s) on the
Mechanical Counter Cover using a Nipper, or a
Cutter.
(9) Secure the Mechanical Counter Cover with 1
Screw, that was removed in step (2).
(10) Close the Front Cover.
(11) Plug the AC Power Cord, and turn the Main
Power Switch on the Back, and the Power
Switch on the Left Side of the machine to the ON
position.
(12) Reconnect the Telephone Line / LAN Cable if it
was disconnected.
To Next Page
Loading...
