716
DP-C405/C305/C265
FEB 2008Ver. 1.1
(46) Connect one end (with 2 connectors) of the
SW4 Harness [11] to the Heater Switch.
(47) Route the SW4 Harness through the hole in
the frame as illustrated.
(48) Install the Front Left Cover Bracket
Assembly.
(49) Secure the Front Left Cover Bracket
Assembly with 2 Screws.
(50) Secure the SW4 Harness with 2 Harness
Clamps.
To Next Page
Loading...
