Panasonic DP-C305 - Page 719

719
DP-C405/C305/C265
FEB 2008Ver. 1.1
(65) Install 6 Harness Clamps [19].
(66) Secure the HT1 Harness with 3 Harness
Clamps.
(67) Route the HT1 Harness through the hole in the
frame as illustrated.
(68) Secure the HT1 Harness with 6 Harness
Clamps.
(69) Remove 2 Screws.
(70) Remove the Rear Scanner Cover.