723
DP-C405/C305/C265
FEB 2008Ver. 1.1
(87) Install 5 Harness Clamps [18].
(88) Connect one end (with 1 connector) of the HT3
Harness [8] to the Connector.
(89) Install 2 Edge Saddles [17].
(90) Route one end of the HT3 Harness (Short)
through the left side hole in the frame as
illustrated.
(91) Route the other end of the HT3 Harness
(Long) through the right side hole in the frame
as illustrated.
(92) Install 2 Connector Covers [4] to end of the
HT3 Harnesses.
To Next Page
Loading...
