725
DP-C405/C305/C265
FEB 2008Ver. 1.1
(101) Install the Harness Clamp [20].
(102) Connect one end of the HT4 Harness [9]
(Black) to connector CN172 on the RLB PC
Board.
(103) Hook the HT4 Harness with 2 Latch Hooks.
(104) Secure the HT4 Harness with 2 Harness
Clamps.
(105) Secure the Ground Harness with 1 Screw
[25].
(106) Pull out the 3rd/4th Paper Tray.
To Next Page
Loading...
