Panasonic DP-C305 - Page 73

73
DP-C405/C305/C265
FEB 2008Ver. 1.1
<Paper Size Sensor>
(31) Remove 2 Screws (X5).
(32) Disconnect 2 Harnesses from the Sensor.
(33) Remove 2 Multi Beam Sensor 1 (1722).
Note:
1. Do not touch the surface of the Sensors with
your hands.
2. Clean any dirt or fingerprints with a Dry Cotton
Swab.
3. Do not use Isopropyl Alcohol or any other
Alcohol.
For PK / PT Only
(34) Remove 1 Screw (X5).
(35) Disconnect 1 Harness from the Sensor.
(36) Remove 1 Multi Beam Sensor 2 (1723).
Note:
1. Do not touch the surface of the Sensors with
your hands.
2. Clean any dirt or fingerprints with a Dry Cotton
Swab.
3. Do not use Isopropyl Alcohol or any other
Alcohol.
(37) Remove 1 Screw (X5).
(38) Disconnect the Harness from the Sensor.
(39) Remove the Multi Beam Sensor 2 (1723).
<Cleaning Mirrors>
(40) Clean the Mirror 2 (1621) with a soft cloth.