746
DP-C405/C305/C265
FEB 2008Ver. 1.1
10.1.7. Deleting the Entire Address Book
Enter the following command as email text to clear the address book on this machine completely:
@command
delete
@end
This command can be inserted before the @begin to @end block to clear the address book entirety and
then reconfigure it with new data.
If this method is used, the message "The "Overwrite Warning" message is not displayed in the email that is
returned from this machine.
To delete the entire data in the address book, enter the following command on the line in the "Subject" field
in the email.
Note:
Executing the ādeleteā command will clear the address book, resetting it to its factory setting.
#set abbr (password)#: This password is a remote password preprogrammed as local
station information about this machine.
Before transmitting this command, receive data on your
computer and back it up as instructed in the earlier sections of this chapter
To Next Page
Loading...
