Panasonic DP-C305 - Page 75

75
DP-C405/C305/C265
FEB 2008Ver. 1.1
<Scanning Motor>
(47) Remove 2 Screws (X5).
(48) Remove the ADF Harness Holder (1517).
(49) Disconnect the ADF Harness.
Note:
When reinstalling the ADF, take note of the
connector position, and its keys. Insert it gently,
and do not force the connector if it is facing the
wrong way.
(50) Open the ADF Unit.
(51) Remove 2 Screws (N6).
(52) Loosen 2 Screws.
(53) Remove the ADF Unit.
(54) Remove 4 Screws (S6).
(55) Remove the Rear Platen Cover (101).