818
DP-C405/C305/C265
FEB 2008Ver. 1.1
Fig. 3-036
(4) Pull the Processing Stopper Base [3] to the
front, and free the Claw [5] at the front and the
Claw [6] at the rear of the Processing Stopper
[4].
Fig. 3-037
(5) Disconnect 3 Connectors [7].
(6) Release 2 Claws [8] of the harness retainer, and
detach the Motor Harness [9].
[3]
[6]
[4]
[4]
[5]
[9]
[8]
[7]
To Next Page
Loading...
