88
DP-C405/C305/C265
FEB 2008Ver. 1.1
<Replacing the Fuser Belt Unit (4926) >
(25) Remove all the tapes, and shipping material from
the new Belt Unit.
(26) Remove the 2 Bands.
(27) Remove the Protective Paper, and Shipping
Materials.
(28) Remove 2 Pins.
(29) Install the New Fuser Belt Unit on the Fuser
Main Unit.
(30) Hook 2 Pressure Springs.
Caution:
Don't use a plier for unlocking the Springs, Not to
damage the spring. Ensure the Pressure Springs
are unlock position when replace the Fuser Belt
Unit.
To Next Page
