97
DP-C405/C305/C265
FEB 2008Ver. 1.1
(27) Remove the Harness from 3 Mini Clamps, and 6
Clamps.
(28) Remove 2 Screws.
(29) Remove the Right Side Rear Cover (205). (See
sect. 2.2.6.)
(30) Open the Right Side Upper Cover. (See sect.
2.2.4.)
(31) Remove the Fuser Unit. (See sect. 2.2.4.)
(32) Remove 2 Screws (S6).
(33) Remove the Top Cover (207).
(34) Disconnect 2 Harnesses on the ADU PC Board
(CN401, and CN402), and the intermediate
connector.