The Graphical Keypad 7-1
AC30 series Variable Speed Inverter
Chapter 7: The Graphical Keypad
The inverter is fitted with a Graphical Keypad referred to throughout as GKP.
It provides for local control of the inverter, monitoring, and complete access for application
programming.
Insert the Keypad into the front of the inverter (replacing the blank cover); or if supplied
separately to be used remotely, up to 3 meters away, use the mounting kit with connection
lead, see Chapter 4 for full details.
For remote installation refer to page 4-14 Fitting a Remote GKP.
To Next Page
Loading...
