Parker AC30 - Motor Sequencer

Parameter Reference D-107
AC30 series Variable Speed Drive
Motor Sequencer
Parameters::Motor Control::Motor Sequencer
These parameters are associated to the internal motor sequencer states machine to start and stop the motor control.
Parameter Name
No.
Path
Default
Range
Units
Writable
Start Delay Enable
1560
Parameters::Motor Control::Motor
Sequencer
FALSE
STOPPED
Enable the delay to action “ramping to Setpoint” from the Run Command. This can allow a period for motor flux to establish ( AC
induction motor ) before the ramp to setpoint
Start Delay
1634
Parameters::Motor Control::Motor
Sequencer
0.000
0.000 to 30.000
s
STOPPED
Time to delay the action of “ramping to Setpoint” from the Run Command in seconds.
Delay To Start
1635
Parameters::Motor Control::Motor
Sequencer
0.000 to Max
s
NEVER
Remaining time of the delay before “ ramping to Setpoint” after the Run Command occurs.