4-45 Installation
AC30 series Variable Speed Inverter
Firmware Update
UPDATING THE INVERTER FIRMWARE
Prepare SD card
Copy the new firmware to an SD card, ensure the file is named firmware 30x for the AC30V or firmware.30P for the AC30P and AC30D.
New firmware is available at www.parker.com/ssd/pdq or can be copied from the Parker Drive Quicktool “Drive Maintenance” task.
Perform the upgrade
CAUTION: DO NOT REMOVE POWER FROM THE INVERTER DURING THE FIRMWARE UPDATE.
Insert the SD in the inverter’s SD slot. Replace the GKP if necessary. The ”Update Firmware” will now be visible in the wizard menu. This is
accessed from the top menu by pressing the key, (soft left).
To start the update, change the value from FALSE to TRUE. The inverter will restart once the process is complete.
To Next Page
Loading...
