Parker AC30 - Declarations

Compliance C-46
AC30 series Variable Speed Inverter
DECLARATIONS
AC30 FRAME D, E, F, G, H, J AND K VARIABLE SPEED DRIVES
MANUFACTURERS EC DECLARATIONS OF CONFORMITY
Date CE marked first applied: 01/10/12
EMC Directive
Low Voltage Directive
Machinery Directive
In accordance with the EC Directive
2014/30/EU
We Parker Hannifin Manufacturing Limited,
address as below, declare under our sole
responsibility that the above Electronic Products
when installed and operated with reference to the
instructions in the Product Manual (provided with
each piece of equipment) is in accordance with
the relevant clauses from the following
standards:-
EN 61800-3 (2004)(+A1:2012)
Note: Filtered versions
In accordance with the EC Directive
2014/35/EU
We Parker Hannifin Manufacturing Limited,
address as below, declare under our sole
responsibility that the above Electronic
Products when installed and operated with
reference to the instructions in the Product
Manual (provided with each piece of
equipment), is in accordance with the
following standard :-
EN 61800-5-1 (2007)
In accordance with the EC Directive
2006/42/EC
We Parker Hannifin Manufacturing Limited,
address as below, declare under our sole
responsibility that the above Electronic
Products when installed and operated with
reference to the instructions in the Product
Manual (provided with each piece of
equipment), is in accordance with the
following standards :-
EN 61800-5-2 (2007) Safe Torque Off (STO)
EN ISO 13849-1 (2008) PLe/SIL3
MANUFACTURERS DECLARATIONS OF CONFORMITY
EMC DECLARATION
Low Voltage and MACHINERY DIRECTIVES
We Parker Hannifin Manufacturing Limited, address as below, declare
under our sole responsibility that the above Electronic Products when
installed and operated with reference to the instructions in the Product
Manual (provided with each piece of equipment) is in accordance with the
relevant clauses from the following standards:-
BSEN61800-3 (2004)(+A1:2012)
Notes:
i. Non-filtered versions
ii. This is provided to aid justification for EMC Compliance when the unit is used as a component.
The above Electronic Products are components to be incorporated into
machinery and may not be operated alone.
The complete machinery or installation using this equipment may only be
put into service when all safety considerations of the Directive
2006/42/EC are fully implemented.
Particular reference should be made to EN60204-1
(Safety of Machinery - Electrical Equipment of Machines).
All instructions, warnings and safety information of the Product Manual
must be implemented.
Dr. Martin Payn
(EM Compliance Manager)
Parker Hannifin Manufacturing Limited, Automation Group,
ELECTROMECHANICAL DRIVES BUSINESS UNIT, NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44 (0) 1903 737000, FAX: +44 (0)1903 737100
Registered Number 4806503 England. Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ