Parker AC30 - System Board IO

Parameter Reference D-175
AC30 series Variable Speed Drive
System Board IO
Parameters::System Board::System Board IO
Parameter Name
No.
Path
Default
Range
Units
Writable
Output Enable
1678
Setup::Inputs and Outputs::System
Board Option
Parameters::System Board::System
Board IO
FALSE
ALWAYS
Turns on the system board A, B and Z outputs.
Output Source
1679
Same as PNO 1678
0
0:SYSTEM BOARD SLOT 1
1:SYSTEM BOARD SLOT 2
2:SYNTHETIC ENCDR
3:DIGITAL OUTPUTS
STOPPED
Selects the source of the retransmit output. i.e. Slot 1, Slot 2, or synthetic encoder.
Output Voltage
1680
Same as PNO 1678
0
0:5 V
1:12 V
2:15 V
3:20 V
ALWAYS
Sets the voltage output of the system board encoder retransmit.
Synth Encoder Lines
1696
Same as PNO 1678
2048
1 to 15000000
ALWAYS
Number of lines per revolution to be simulated by the synthetic encoder function. This affects the Z output pulse.
Synth Encoder Speed
1698
Same as PNO 1678
0
0 to 15000000
RPM
ALWAYS
Simulated speed to output when the synthetic encoder mode is selected.
Synth Encoder Invert
1702
Same as PNO 1678
FALSE
ALWAYS
Sets the direction of the synthetic encoder rotation.