Parker AC30 User Manual

D-42 Parameter Reference
AC30 series Variable Speed Drive
Current Sensor Trip
Parameters::Trips::Current Sensor Trip
This function contains parameters associated to the missing current sensor detection and trip condition
Parameter Name
No.
Path
Default
Range
Units
Writable
Current Diff Level
1658
Parameters::Trips::Current Sensor Trip
25.00
0.00 to 100.00
%
ALWAYS
The percentage of motor rated current which, if exceeded by difference between RMS values of two current sensor measurements,
causes this trip to become active. This trip detects missing, or broken connections in the current sensing circuitry that result in loss of
measurement of one sensor. Enabled in V/Hz mode of operation only.

Parker AC30 Specifications

General

Protection Rating	IP20
Series	AC30
Type	Variable Frequency Drive
Overload Capacity	150% for 60 seconds
Cooling Method	Fan Cooled
Communication Protocols	CANopen
Power Range	0.75 to 250 kW (1 to 350 hp)
Switching Frequency	2kHz to 16kHz
Safety	Safe Torque Off (STO)
Output Current	Model Dependent
Power Rating	0.75 to 250 kW (1 to 350 hp)
Efficiency	>97%
Protection Features	Overcurrent, overvoltage, undervoltage, short circuit, overheating
Dimensions	Model Dependent
Weight	Model Dependent
Operating Temperature	-10°C to +40°C
Output Voltage	0 to Input Voltage