EasyManuals Logo

Parker AC30 User Manual

Parker AC30
522 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #357 background imageLoading...
Page #357 background image
Parameter Reference D-97
AC30 series Variable Speed Drive
Local Control
Parameters::Keypad::Local Control
These parameters configure the use of the GKP keys for local start / stop control of the drive.
Parameter Name
No.
Path
Default
Range
Units
Writable
Run Key Action
1140
Parameters::Keypad::Local Control
0
0:RUN
1:JOG
STOPPED
Defines the use of the green run key in local mode.
When RUN is selected, pressing the green Run key will start the drive using Local Reference as the active setpoint. To stop the drive
press the RED Stop key.
When JOG is selected, pressing the green Run key will start the drive running using the Jog Setpoint as the active setpoint. The drive
will stop when the key is released.
Local/Rem Key Active
1253
Parameters::Keypad::Local Control
TRUE
ALWAYS
Enables the L/R soft key function. This is used to change between Local and Remote sequencing modes from the GKP.
Local Dir Key Active
1255
Parameters::Keypad::Local Control
TRUE
ALWAYS
Enables the ability to change the direction from the GKP when running in local sequencing mode. When FALSE the direction will
always be positive.
Local Run Key Active
1239
Parameters::Keypad::Local Control
TRUE
ALWAYS
Enables the green Run key function when in local sequencing mode. When FALSE the Run key is ignored, (for both RUN and JOG
modes).
Local Reverse
1240
Parameters::Keypad::Local Control
FALSE
ALWAYS
Used to change the direction the motor will rotate when in local sequencing mode. When FALSE the direction will be “Forwards”. When
TRUE the direction will be reverse.

Table of Contents

Other manuals for Parker AC30

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Parker AC30 and is the answer not in the manual?

Parker AC30 Specifications

General IconGeneral
Protection RatingIP20
SeriesAC30
TypeVariable Frequency Drive
Overload Capacity150% for 60 seconds
Cooling MethodFan Cooled
Communication ProtocolsCANopen
Power Range0.75 to 250 kW (1 to 350 hp)
Switching Frequency2kHz to 16kHz
SafetySafe Torque Off (STO)
Output CurrentModel Dependent
Power Rating0.75 to 250 kW (1 to 350 hp)
Efficiency>97%
Protection FeaturesOvercurrent, overvoltage, undervoltage, short circuit, overheating
DimensionsModel Dependent
WeightModel Dependent
Operating Temperature-10°C to +40°C
Output Voltage0 to Input Voltage

Related product manuals