Parker AC30 User Manual

D-46 Parameter Reference
AC30 series Variable Speed Drive
Device State
Parameters::Device Manager::Device State
Parameter Name
No.
Path
Default
Range
Units
Writable
Target State
0988
Parameters::Device Manager::Device
State
3:PREOPERATIONAL
7:OPERATIONAL
STOPPED
The requested operating state. This may be set from the Web Page or GKP. The PDQ configuration tool changes the operating state
of the drive using a different mechanism.
Actual State
0989
Parameters::Device Manager::Device
State
0:INITIALISING
1:INITIALISED
2:PREPARING PREOP
3:PREOPERATIONAL
4:PREPARING OP
5:FAILED TO READY
6:READY FOR OP
7:OPERATIONAL
8:FAULTED
9:FATAL ERROR RECOVER
NEVER
Reports the actual operating state of the drive.
Application FE State
0990
Parameters::Device Manager::Device
State
Same as PNO 989
NEVER
Base IO FE State
0991
Parameters::Device Manager::Device
State
Same as PNO 989
NEVER
Basic Drive FE State
0992
Parameters::Device Manager::Device
State
Same as PNO 989
NEVER
Ethernet FE State
0993
Parameters::Device Manager::Device
State
Same as PNO 989
NEVER
Keypad FE State
0994
Parameters::Device Manager::Device
State
Same as PNO 989
NEVER
Comms Option FE State
0995
Parameters::Device Manager::Device
State
Same as PNO 989
NEVER

Parker AC30 Specifications

General

Protection Rating	IP20
Series	AC30
Type	Variable Frequency Drive
Overload Capacity	150% for 60 seconds
Cooling Method	Fan Cooled
Communication Protocols	CANopen
Power Range	0.75 to 250 kW (1 to 350 hp)
Switching Frequency	2kHz to 16kHz
Safety	Safe Torque Off (STO)
Output Current	Model Dependent
Power Rating	0.75 to 250 kW (1 to 350 hp)
Efficiency	>97%
Protection Features	Overcurrent, overvoltage, undervoltage, short circuit, overheating
Dimensions	Model Dependent
Weight	Model Dependent
Operating Temperature	-10°C to +40°C
Output Voltage	0 to Input Voltage