Compliance C-6
AC30 series Variable Speed Inverter
EMC COMPLIANCE (4KHZ)
When fitted with the specified
external filter & EMC filter kit, refer
to C16-17
When fitted with the specified
external filter & EMC filter kit,
refer to C16-17
Refer to C-9 for the use of a suitable
external filter with the required
characteristics
Refer to C-10 for the use of a
suitable external filter with the
required characteristics
Product supplied as a component,
a suitable external filter is required
When fitted with an EMC filter kit
(internal filter, clamping bracket
and ferrite), refer to C-17
Maximum cable length 10 m
When fitted with an EMC filter kit
(internal filter, clamping bracket and
ferrite), refer to C-17
Maximum cable length 10 m
When fitted with an EMC filter kit
(internal filter, clamping bracket and
ferrite), refer to C-18
Maximum cable length 10 m
When fitted with the specified external
filter & EMC filter kit, refer to C17
Maximum cable length 25 m
When fitted with the specified
external filter & EMC filter kit, refer to
C18
Maximum cable length 25 m
Product supplied as a component,
a suitable external filter is required
When fitted with an internal filter
Maximum cable length 50 m
When fitted with an internal filter
Maximum cable length 50 m
When fitted with an internal filter
Maximum cable length 25 m (50m
with EMC filter kit, Refer to C-18)
When supplied by AC to DC full bridge and required line choke. Maximum cable length 50 m.
When mounted inside a cubicle with the required attenuation between:
No specific enclosure required
No specific enclosure required
No specific enclosure required
No specific enclosure required
From all other wiring (clean)
From all other wiring (noisy)
From all other wiring (noisy)
From all other wiring (noisy)
From all other wiring (sensitive)
8, 12, 16kHz will require extra filtering.
To Next Page
Loading...
