Parker AC30 - Frame J

Installation 4-8
AC30 series Variable Speed Inverter
FRAME J
Through panel mounting an inverter in a cubicle allows you to use a smaller cubicle because much of the heat generated by the inverter is
dissipated outside the cubicle.
Figure 4-7 Mechanical Dimensions for Through Panel Frame J - All dimensions are in millimetres (inches)
Fixings: 8 x 9.0mm holes M8 fixings, refer to panel mounting kit part number LA502793
(14.96)
(12.99)
(0.98)
(9.29)
(31.49)
(9.64)
(14.96)
(0.49)
(1.67)
(14.17)
(11.81)
(10.82)
(0.39)
(8.60)
(12.59)
(29.33)
(30.11)
263.1 (10.36) for AC30D