Parker AC30 User Manual

Ethernet 12-16
AC30 series Variable Speed Inverters
WEB SERVER PARAMETER SUMMARY
Parameter Name
No.
Path
Default
Range
Units
Writable
Web Access
0944
Setup::Communications::Base Ethernet
Parameters::Base Comms::Web Server
1:LIMITED
0:DISABLED
1:LIMITED
2:FULL
ALWAYS
Web Server parameter.
Enables access to the inverter web server.
Enumerated values:
0: DISABLED – a web browser is prevented from accessing the inverter web server.
1: LIMITED – a web browser may access a limited set of pages on the inverter web server.
2: FULL – a web browser has full access to the pages on the inverter web server, however authentication
will be required if a password has been set.
Web View Level
0945
Parameters::Base Comms::Web Server
1:TECHNICIAN
0:OPERATOR
1:TECHNICIAN
2:ENGINEER
ALWAYS
Web Server parameter.
Sets the view level when accessing parameters via the web server.
Enumerated values:
0: OPERATOR
1: TECHNICIAN
2: ENGINEER
Web Password
0946
Parameters::Base Comms::Web Server
none
-
ALWAYS
Web Server parameter.
Sets the password for access to restricted inverter web pages such as the Parameters Page. This may only be changed on the
web Services page.

Parker AC30 Specifications

General

Protection Rating	IP20
Series	AC30
Type	Variable Frequency Drive
Overload Capacity	150% for 60 seconds
Cooling Method	Fan Cooled
Communication Protocols	CANopen
Power Range	0.75 to 250 kW (1 to 350 hp)
Switching Frequency	2kHz to 16kHz
Safety	Safe Torque Off (STO)
Output Current	Model Dependent
Power Rating	0.75 to 250 kW (1 to 350 hp)
Efficiency	>97%
Protection Features	Overcurrent, overvoltage, undervoltage, short circuit, overheating
Dimensions	Model Dependent
Weight	Model Dependent
Operating Temperature	-10°C to +40°C
Output Voltage	0 to Input Voltage